Carpet installation
Aggie Carpet and Tile Cleaning installs carpet in homes and businesses across Las Cruces, NM. Aggie can supply carpet and pad through its supplier, with samples to look at before choosing, or install carpet the customer bought elsewhere. The job covers taking out the old carpet and pad, replacing tack strip, installing on stairs, and moving furniture out and back. A typical home takes 1 to 2 days, and the installation carries a 3-month warranty.
5-Star Rated on GoogleLocal carpet, tile, rug, and furniture cleaning
2025 Neighborhood FaveRecognized by Nextdoor neighborsQuick answer
How Aggie installs carpet
Aggie cleans, patches, and re-stretches carpet that someone else installed, and a poor original installation is the most common reason Aggie sees for wrinkled carpet in Las Cruces. That shapes how Aggie installs. The pad gets matched to the carpet instead of picked for softness, the tack strip gets checked once the old carpet is up, seams get placed before anything is cut, and stretch-in carpet is power stretched so it stays flat.
Carpet and pad can come through Aggie's supplier, with samples to look at first, or Aggie installs carpet you already bought.
Furniture moved out and back, old carpet and pad removed, tack strip replaced where needed, and stairs installed tread by tread.
If a problem with the installation work shows up within 3 months, Aggie comes back to look at it and make it right.
Who we serve
Carpet installation for Las Cruces homeowners, renters, and landlords covers bedrooms, living rooms, hallways, and stairs. Most installs start with worn carpet that cleaning can no longer bring back, or carpet damaged past the point of patching.
Commercial carpet installation for Las Cruces offices, property managers, and businesses covers both stretch-in carpet over pad and glue-down carpet. Traffic, rolling chairs, and the hours the space has to stay open shape the plan.
Why it happens
Many carpet problems people blame on the carpet start at installation. The Carpet and Rug Institute says wrinkles are rarely a result of manufacturing. They come from carpet that was not power stretched, a cushion that is too thick or too soft, or carpet installed cold before it settled to room temperature. Seams that show usually sit where traffic crosses them or where window light rakes across them. Each of those gets decided on install day.
What the pros know
A poor original installation is the most common reason Aggie sees for rippled carpet in Las Cruces. The Carpet and Rug Institute calls power stretching mandatory for stretch-in carpet, at 1 to 1.5 percent in both length and width, and treats knee kickers as tools for positioning only. Carpet that was kicked into place often looks fine at first and ripples later. Stretch-in carpet that Aggie installs is power stretched.
Where a seam goes matters as much as how it is joined. The Carpet and Rug Institute's installation standard asks for seams that run with the main traffic rather than across it, stay out of doorways, and sit where window light does not rake across them. A well-made seam in the wrong spot still shows every afternoon when the sun comes in low. Strong Las Cruces sun through west-facing windows makes that placement worth planning.
Tack strip gets checked once the old carpet is up, not assumed. Rusted pins, flattened pins, and strip that has come loose from the slab cannot grip new carpet, and a fresh stretch on bad strip loosens again. The moment the floor is bare is the easy time to replace it, before new carpet covers the problem for years.
Thicker pad feels softer underfoot in the showroom and often works against the carpet at home. A cushion that is too thick or too soft lets carpet flex with every step, and the Carpet and Rug Institute links that flexing to loose carpet and wrinkling. Shaw's residential guidelines cap pad at 7/16 inch with a minimum density of 6 pounds. Firm pad sized to the carpet keeps the stretch in the carpet.
Carpet needs time at room temperature before it goes in. The Carpet and Rug Institute notes that carpet installed while cold and stiff will eventually warm, relax, and loosen regardless of how tightly it was stretched. Shaw's guidelines call for a room between 65 and 95 degrees Fahrenheit with humidity no higher than 65 percent for 24 hours before installation. A roll that arrives cold on a January morning in Las Cruces is worth letting settle first.
Every piece of carpet in a room should run the same way. Carpet fibers lean in one direction, and a piece laid opposite the one beside it reads as a different shade even when both came off the same roll. The Carpet and Rug Institute's standard calls for adjacent pieces to share a pile direction, ideally with the pile facing the main entrance to the room. Pile direction gets marked during the layout so it stays consistent across seams.
Glue-down carpet is a common choice where rolling chairs and carts move all day, because there is no pad to flex and no stretch to lose. Stretch-in carpet over pad feels softer and suits private offices and lower-traffic rooms. Many office floors mix the two, and the transition between them gets planned so carts and chair wheels do not catch the edge.
Process
A good installation is planned before the old carpet comes up. Seam placement, pile direction, the pad, and how the carpet meets tile and wood get settled first, because none of them can be changed once the carpet is down.
Measure the space and plan the layout, including where seams will fall, which way the pile will run, and how the carpet meets tile, wood, and doorways.
Choose carpet and pad from samples through Aggie's supplier, or confirm the details of carpet the customer already bought.
Move furniture out of the rooms being carpeted.
Remove the old carpet and pad, then check the floor and the tack strip, replacing strip that is loose, damaged, or missing.
Lay the new pad with its seams offset from where the carpet seams will sit.
Lay the carpet, join the seams, and power stretch it in each direction before hooking it onto the tack strip.
Trim and tuck the edges, finish the transitions and any stairs, move the furniture back, and walk the finished rooms together.
Service coverage
Carpet and pad can come through Aggie's supplier, with samples to look at before choosing, or the customer can supply their own carpet.
The old flooring comes out and the floor underneath gets checked before anything new goes down.
Stairs, seams, and the edges where carpet meets another floor are the details that show most once the job is done.
Homes usually want comfort underfoot, rentals need carpet that holds up between tenants, and offices need carpet that handles rolling chairs.
Compare settings
| Install need | Home setting | Business setting | How Aggie handles it |
|---|---|---|---|
| Choosing carpet | Homeowners want to see samples in their own light before deciding. | Businesses need carpet that stands up to the traffic in each area. | Carpet and pad through Aggie's supplier with samples to look at, or installation of carpet already bought. |
| Old flooring | Worn carpet and flattened pad come out before anything new goes down. | Old commercial carpet may be glued down and come up in sections. | Old carpet and pad removed, then the floor and tack strip checked before new carpet goes in. |
| Staying flat | Large rooms and hallways ripple when carpet was not stretched tight. | Rolling chairs push loose carpet into ridges. | Stretch-in carpet is power stretched, and glue-down carpet is bonded to the floor. |
| Seams | Seams across doorways and in window light show the most. | Seams in corridors take carts and constant traffic. | Seams planned to run with traffic and stay out of doorways where the room allows, with no promise that any seam is invisible. |
| Stairs | Each tread and riser on a staircase needs a tight, secure fit. | Stairwells wear fastest at the nosing. | Stairs installed and secured tread by tread. |
| Rental and turnover | Landlords need new carpet in place between tenants. | Property managers may need several units carpeted in sequence. | A typical home install takes 1 to 2 days, and timing gets planned around the move-in date. |
Quote factors
A carpet installation quote depends on the area, the carpet and pad chosen, and what has to happen before the new carpet goes in. Stairs, old carpet removal, tack strip replacement, furniture, and the condition of the floor underneath all change the scope. Aggie can measure and look at the space before setting expectations.
Related services
Carpet installation connects to a few other services. If the carpet is sound but wrinkled or damaged in one spot, carpet repair and stretching may save the floor. If the carpet only looks tired, a carpet cleaning is worth trying first. If new carpet is going in after a leak or flood, the water damage restoration page covers drying the floor before anything new goes down.
Service area
Aggie Carpet and Tile Cleaning provides carpet installation across Las Cruces, NM, and the nearby El Paso, TX area, with scheduling based in Las Cruces.
Reviews
Recent Google reviews from Las Cruces homes and businesses Aggie has helped.
Aggie Carpet Cleaning of Las Cruces came and cleaned our dirty carpet and dirty tile and grout, saving us lots of money. They were efficient and diligent. They are the BEST carpet and tile cleaners here in Las Cruces, New Mexico.
A wonderful young man came to clean my rug carpets and sofa. He did a fantastic job! Not only are they clean, they look brand new. He was easy to work with, right on time, and a really nice guy overall. Would definitely recommend.
FAQ
Common questions before scheduling.
Both. Aggie can supply carpet and pad through its supplier, and customers can look at samples before choosing. Aggie also installs carpet the customer bought somewhere else. The installation is the same either way, and the quote spells out who supplies what.
Yes. Aggie installs carpet customers bought on their own. It helps to know the carpet type, how much was purchased, and whether pad came with it, so the quote can confirm there is enough material for the rooms, the stairs, and the seams. Keep the paperwork that came with the carpet. Manufacturers such as Shaw note that warranty coverage can be limited when their installation guidelines are not followed.
A typical home takes 1 to 2 days depending on size. Stairs, old carpet removal, tack strip replacement, and rooms full of furniture all add time. The quote includes a time estimate for the actual rooms.
Yes. Old carpet and pad removal is part of the service, and it is also when the floor and tack strip get checked. Damaged, loose, or missing tack strip gets replaced before the new carpet goes in, because new carpet cannot hold a stretch on strip that cannot grip.
Yes. Aggie moves furniture out of the rooms being carpeted and back in once the carpet is down. Fragile items, electronics, and the contents of dressers and shelves are best cleared ahead of time.
Yes. Stairs take more care than a flat room, because each tread and riser is fitted and secured separately, and the carpet has to wrap the nosing tightly without trapping the pile. When asking for a quote, mention how many stairs there are and whether the sides are open or closed.
Pad supports the carpet and controls how much it flexes underfoot. A thicker, softer pad is not always better. The Carpet and Rug Institute notes that a cushion that is too thick and too soft allows excessive flexing, which can lead to loose carpet and wrinkles. Shaw's residential guidelines call for pad no thicker than 7/16 inch with a density of at least 6 pounds. The right pad depends on the carpet chosen.
Wherever the room lets them show least. The Carpet and Rug Institute's installation standard calls for keeping seams to a minimum, running them in the direction of the main traffic, keeping them out of doorways, and keeping natural light from striking across them. Seam placement gets planned with the layout before any carpet is cut. No seam is completely invisible.
It covers Aggie's installation work for 3 months after the job. If a problem with the installation shows up in that time, call Aggie and it gets looked at and made right. Defects in the carpet itself fall under the carpet manufacturer's warranty.
New carpet can have a smell for a short time. The Carpet and Rug Institute says most of it fades within the first 24 hours or so and recommends ventilating for about 48 to 72 hours. Opening windows and running the HVAC fan during and after the install helps it clear.
Yes. Aggie installs carpet in offices and businesses, both stretch-in carpet over pad and tack strip and glue-down carpet bonded to the floor. Glue-down carpet is common where rolling chairs and carts move all day. Work hours and building access get planned during the quote so the office can keep running.
By the measured area and what the job involves. Square footage, the carpet and pad chosen, and whether Aggie supplies the carpet set the starting point. Stairs, old carpet removal, tack strip replacement, furniture, and the condition of the floor underneath adjust it. Aggie can measure and look at the space before setting expectations.
Tell Aggie Carpet and Tile Cleaning which rooms need new carpet, whether there are stairs, what is on the floor now, and whether you already have carpet picked out. Aggie can show samples through its supplier or install carpet you bought, and can measure the space before quoting.
Request a quote
Tell Aggie Carpet and Tile Cleaning which rooms need new carpet, whether there are stairs, what is on the floor now, and whether you already have carpet picked out. Aggie can show samples through its supplier or install carpet you bought, and can measure the space before quoting.
Satisfaction guarantee
If anything about your cleaning is not right, call us and we will come back to make it right. In rare cases where we cannot fix the issue, you may be eligible for a partial or full refund.
